top of page
A detailed close-up of an integrated circuit (IC) die, showing the intricate layout of its components and connections.

VATAGP7.1

PRODUCT

Integrated Circuits

CATEGORY

ROICs for Radiation Detectors

About

128-channel “general purpose” charge sensitive amplifier. Each channel features buffered preamplifiers, a shaper with sample/hold, multiplexed analogue readout and calibration facilities. In addition, each channel has a “fast” shaper that gives a trigger signal. The analogue value and the address of the triggering channels are read out. The ASIC can output all channels, only triggered, or triggered channels with neighbors. Each channel has input leakage current compensation automatically adjusted in each preamplifier channel. This ASIC can be used in parallel with many ASICs, sharing all output lines and some control lines.


Publications

  • A. Studen et al., “A silicon PET probe“, Nuclear Instruments and Methods in Physics Research, Volume 648 (2011)


Product Features


Detectors

Si, hybrid photon detector (HPD)

Detectors

Si, hybrid photon detector (HPD)

Application

Counting, Imaging

Number of inputs

128

Input charge range

±30 fC

Shaping time

500ns (VA), 50ns (TA)

Nominal capacitive load

10 pF

Equivalent Noise Charge (ENC)

70e + 12e/pF

Trigger threshold

Programmable by 5-bit DAC

Trigger outputs

Digital address of triggering channel

Outputs

Multi-hit, multi-plexed amplitude, differential current, serial analogue, sparse readout

Test and calibration

Internal calibration circuit


bottom of page